URC 8800
A/V Producer
User Guide
4
5
Feature
Function
USING YOUR a / v PRODUCER
The SETUP key is used to access
the menu and program your a/v
Producer.
Features and Functions
The illustration below and the chart on the next two
pages describe the features and the functions of the
a/v Producer’s keypad. The following keys will
always have the same function, regardless of which
component you are controlling. For an explanation of
what each key does by component type, please use
the index at the rear of the manual (pages 49 to 61).
The TV, VCR, DVD, CBL/SAT,
TUNER, AMP, CD, and AUX1 keys
are used to select the home enter-
tainment component you want to
control. If your component does not
respond when you press a key on
the remote control, press the TV,
VCR, DVD, CBL/SAT, TUNER,
AMP, CD, or AUX1 key to tell the
remote control which component you
would like to operate.
The HOME THEATER key is used
to select the Home Theater mode of
the a/v Producer.
The ESC (Escape) key is used to
exit the LCD Screen menu.
The LITE key is used to turn ON
and OFF the a/v Producer’s
backlit keypad and LCD screen.
Press the LITE key once to turn
ON the backlight. The a/v
Producer’s backlight will stay on for
5 seconds after the last key press
and re-activates with the press of a
key. To de-activate the backlight,
press the LITE key again.
The POWER key controls power ON
and OFF.
The VOL + (Volume Up), VOL –
(Volume Down) and MUTE keys
control the volume the same as the
Volume Up and Down and Mute
keys on your original remote.
6
7
SETTING THE CLOCK
Feature
Function
To set up the CLOCK/TIME on the display screen:
The CH + (Channel Up) and CH –
(Channel Down) keys change
channels the same as the Channel
Up and Down keys on your
original remote.
1
Press and hold SETUP until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].
The MACRO and MACRO2 keys
memorize up to 15 keystrokes that
can be accessed in sequence at the
press of a single key. These
2
x2 Press the MENU – key twice, the
display will change to [CONFIGURE].
Press SELECT, the display will
change to [THEATR SEL].
keys are not mode specific.
The SHIFT key accesses advanced
features that are mapped under the
following keys: CENTER, MENU,
SELECT, MUTE, PREV CH,
PIP, REW, PLAY, FF, STOP, and
PAUSE.
3
Press MENU – one time, the display
will change to [TIME SETUP].
Press SELECT again.
The 1L ~ 6L keys are used for
learning new features onto the a/v
Producer. See pages 32 to 33 for
further details.
4 0 - 9
The display will change to [TIME]
and the first digit in the time will
blink. Enter either a 0 or a 1, then
the next digit in the time will begin
to blink, continue entering the time
until all four digits of the time have
been set.
5
6
After the time has been set, AM/PM
will then blink. Press MENU – to
toggle between AM and PM, once
AM or PM is selected, press
SELECT.
NOTE: For a detailed explanation of what function each key will
perform by device type (e.g.,TV, VCR, CBL/SAT,etc.), please refer
to pages 49 through 61.
The display will then change to the
day of the week (i.e., MON, TUE,
WED, THU, FRI, SAT or SUN). Use
MENU – to toggle through the days
until the proper day of the week is
displayed on the screen, then press
SELECT. The display will return to
the [DEVICE and the TIME] screen
with the correct time on the display.
NOTE: After changing the batteries, you will have to reprogram
the clock.
8
9
7
Continue to enter your codes as
illustrated in Steps 5 and 6 until the
QUICK SET-UP
a/v Producer is operating all of your
home entertainment
To Quickly Set Up the a/v Producer to Operate
Your Home Entertainment Components
components. Once you have fin-
ished setting up your components,
press ESC to return to the [DEVICE
and TIME] display.
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1
2
3
Turn on all of the components that
you will be setting up.
If you would like to set up each of your
components individually, or if you purchase a
component after you have set up the a/v
Producer, go to the “SETTING UP INDIVIDUAL
HOME ENTERTAINMENT COMPONENTS”
section on pages 10 to 23 in this manual.
Press and release the TV key.
Press and hold SETUP until the
display screen changes from
[TV and the TIME] to [TIMED SEQ].
Set Up Codes for TVs ...................................Page 10
Set Up Codes for VCRs ................................Page 13
Ser up Codes for TV/VCR Combinations......Page 14
Set Up Codes for Cable Boxes .....................Page 16
Set Up Codes for DSS and
4
5
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
Satellite Receivers..................................Page 17
Set Up Codes for DVD or LD Players ...........Page 19
Set Up Codes for CD or MD Players ............Page 20
Set Up Codes for Tuner/Receivers................Page 22
Set Up Codes for Amplifiers..........................Page 23
[DEV SET UP]. Press SELECT. The
display will change to [TV].
Enter the first TV code listed for your
brand in the “Set Up Codes for TVs”
on pages 10-12, then press
SELECT. Point the remote control at
the TV and press POWER.Your
Television should turn OFF. If your TV
does not turn OFF, enter the
next code in the code list then press
SELECT followed by POWER again.
Once your TV turns OFF, press VCR.
You will now enter your VCR code.
6
Enter the first VCR code listed for
your brand in the “Set Up Codes for
VCRs” on pages 13-14, then press
SELECT. Point the remote control at
the VCR and press POWER.Your
VCR should turn OFF. If your VCR
does not turn OFF, enter the next
code in the code list then press
SELECT followed by POWER again.
Once your VCR turns OFF, press
CBL/SAT.You will now enter your
Cable Box code.
10
11
Set Up Codes for TVs (cont.)
SETTING UP INDIVIDUAL HOME
ENTERTAINMENT COMPONENTS
Kaypani
0052
Bell & Howell 0154, 0016
Kenwood
Kloss
LG
0030, 0019
0024, 0046
0056
0047, 0054, 0017, 0154,
0156, 0178, 1347
0016
Beuamark
Bradford
Brockwood
Broksonic
CCE
0017, 0030, 0179
0180
0019
0236, 0463, 0003
To Set Up Your Television:
LXI
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
0217
Logik
Luxman
MEI
MGA
MTC
CXC
0180
0056
0185
Candle
0030, 0056, 0046, 0186
1
2
3
Turn on your TV.
Capehart
Carnivale
Carver
0052
0030
0054
0150, 0030, 0178, 0019
0060, 0030, 0019, 0056,
0185
0054, 0030, 0179, 0020,
0024, 0096, 0186, 0187,
0386, 0171
0016
0054, 0030
0051, 0250
0178, 0145, 0003
0154, 0250, 0150, 0060,
0178, 0056, 0016
0047, 0017, 0051, 0039,
0032, 0135
Press and release the TV key.
Celebrity
Cineral
Citizen
0000
Magnavox
0451, 0092
0060, 0030, 0056, 0039,
0046, 0092, 0186, 0280
0185
0056
0180, 0157, 0185
0180
Press and hold SETUP until the
display screen changes from
Majestic
Marantz
Matsushita
Megatron
Memorex
Clairtone
Concerto
Contec
Craig
[TV and the TIME] to [TIMED SEQ].
Crosley
Crown
0054
0180, 0039
4
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
Midland
Curtis Mathes 0047, 0054, 0154,
0051,0451, 0093, 0060,
0030, 0145, 0056, 0016,
0039, 0166, 0466, 1147,
1347
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
0021
0093, 0150, 0178, 0019
0093, 0055
0180, 0217
0156, 0178, 0166
0030, 0019, 0056, 0497
0092
0047, 0017, 0154, 0156,
0030, 0178, 0092, 1347
0018
Daewoo
0451, 0019, 0039, 0092,
0623, 0624
5
6
Press SELECT and the display
screen will change to [TV].
Daytron
0019, 0039
Denon
0145
Dumont
0017, 0019
Dwin
0720, 0774
Noshi
Onwa
Optimus
Optonica
Orion
Dynatech
Electroband
Electrohome
Emerson
0217
0000, 0185
0381
0154, 0236, 0463, 0180,
0282, 0178, 0019, 0179,
0039, 0038, 0177, 0185,
0280, 0623, 0624
0030
Enter the first TV code listed for your
brand in the “Set Up Codes for TVs”
on pages 10-12, then press SELECT.
0180
0154, 0250, 0166
0093, 0165
0236, 0463, 0179
0047, 0054, 0154, 0156,
0051, 0250, 0093, 0165,
0150, 0060, 0053, 0178,
0145, 0055, 0001, 1347
0047, 0156, 0051, 0060,
0030, 0178, 0021, 0019,
0018, 0056, 0039, 0003,
0027, 0032, 0135, 1347
0054, 0463, 0030, 0145,
0019, 0020, 0024, 0096,
0186, 0187
0054, 0017, 0000, 0021,
0019, 0018, 0039, 0020,
0024, 0027, 0052, 0171
0030, 0019, 0039
0038, 0166
0019, 0039, 0092
0051
0047, 0030, 1347
0178, 0003, 0052, 0466
0017, 0019
0051, 0250, 0165, 0055
0047, 0051, 0093, 0019,
0018, 0038, 0090, 0135,
1047, 1147, 1247, 1347
0047, 0154, 0165, 0180,
0030, 0178, 0019, 0056,
0039, 0032
0154, 0165, 0180, 0030,
0178, 0019, 0056, 0039,
0032
Panasonic
7
Aim the remote control at the TV and
press POWER.Your TV should turn
OFF. Press ESC to return the display
to [TV and the TIME]. If your TV does
not turn OFF, enter the next code in
the code list then press SELECT fol-
lowed by POWER again. Once the
correct code is entered, press ESC to
return the display to [TV and TIME].
Envision
Fisher
0154, 0159
Penney
Fujitsu
Funai
Futuretech
GE
0179
0180, 0179, 0171
0180
0047, 0051, 0451, 0093,
0282, 0178, 0021, 0055,
0027, 0135, 1147, 1347
0017, 0030, 0019
0060
0030, 0178, 0019, 0056,
0039, 0001, 0032
0053, 0056
Philco
Philips
Gibralter
Go Video
GoldStar
Pilot
Gradiente
Grunpy
For a detailed explanation of what function each key
will perform in the TV mode, please refer to page 49.
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
RCA
0180, 0179
Hallmark
0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard
Hitachi
0180
Set Up Codes for TVs
0145, 0056, 0032, 0038,
A-Mark
AOC
0003
Ambassador
Ampro
0177
0751
0180
0151
0030, 0019, 0003, 0052
Infinity
Inteq
JBL
0054
0017
0054
0185
Anam
Abex
0032
Anam National 0055
Admiral
Adventura
Aiko
0093
0046
0092
Archer
Audiovox
0003
Radio Shack
Realistic
JCB
0000
0451, 0180, 0003, 0092,
JVC
0053
0623
0060
0180
0019
Janeil
KEC
KTV
0046
0180
Akai
Alaron
Allegro
0030
0179
0720, 0774
Aumark
Baysonic
Belcor
0180, 0030, 0039, 0185,
0217, 0280
12
13
6
Enter the first VCR code listed for
your brand in the “Set Up Codes for
VCRs” below or “Set Up Codes for
TV/VCR Combinations” on the next
page, then press SELECT. Aim the
remote control at the VCR and press
POWER or PLAY.Your VCR should
turn OFF or start to play. Press the
ESC key to return the display to [VCR
and the TIME]. If your VCR does not
turn OFF or start to play, enter the
next code in the code list then press
SELECT followed by POWER or
PLAY again. Once the correct code is
entered, press the ESC key to return
the display to [VCR and the TIME].
Set Up Codes for TVs (cont.):
Symphonic
TMK
0171
0178, 0056, 0177
0093
0055, 0003
0047, 0017, 0051, 0250,
1347
Rhapsody
Runco
0185
0017, 0030, 0497, 0603
Tandy
SSS
0180, 0019
Tatung
Technics
Sampo
Samsung
0030, 0039, 0032, 0052
0060, 0030, 0178, 0019,
0056, 0039, 0032
Technol Ace
Techwood
Teknika
0179
Samsux
Sansei
Sansui
Sanyo
0039
0451
0463
0154, 0146, 0159
0051, 0056, 0003
0054, 0180, 0150, 0060,
0019, 0179, 0056, 0016,
0039, 0092, 0186
0056
0154, 0156, 0060
0185
0039
or
Scimitsu
Scotch
Scott
0019
0178
Telefunken
Toshiba
Tosonic
Totevision
Trical
0236, 0180, 0178, 0019,
0179
0047, 0054, 0154, 0156,
0178, 0179, 0056, 0146,
Sears
0157
0021, 0027
Universal
0159, 0171
Vector Research 0030
Victor
Semivox
Semp
0180
0156
0053
0054
0178, 0019
0046
0054, 0156, 0165, 0030,
0178, 0021, 0019, 0179,
0056, 0016, 0020, 0027,
0080, 0096, 0111, 0135,
0187
Vidikron
Vidtech
Viking
Sharp
0093, 0165, 0039, 0157,
0386
0019
Shogun
For a detailed explanation of what function each
key will perform in the VCR mode, please refer to
page 51 in the “Key Index”.
Wards
Signature
Simpson
Sony
0016
0186, 0187
0000, 0080, 0111
Soundesign
Spectricon
Squareview
Starlite
0180, 0178, 0179, 0186
0003
0171
0180
Set Up Codes For VCRs
White
Westinghouse 0623, 0624
Admiral
Adventura
Aiko
Aiwa
Akai
0048
0000
0278
Garrard
Go Video
GoldStar
Gradiente
HI-Q
0000
Yamaha
Zenith
Zonda
0030, 0019
0017, 0016, 0092, 0146
0003
Supre-Macy
Supreme
Sylvania
0046
0000
0432, 0526
0037, 0038
0000, 0008
0047
0054, 0030, 0020, 0024,
0096, 0186, 0187, 0381
0037, 0000, 0307
0041, 0061, 0106
American High 0035
Harley Davidson 0000
Asha
Audiovox
Beaumark
Bell & Howell 0104
Broksonic
0240
0037
0240
Harman/Kardon 0081, 0038
Harwood
Headquarter
Hitachi
JVC
Jensen
KEC
0072, 0068
0046
0000, 0042, 0041, 0105
0067, 0041, 0008
0041
To Set Up Your VCR or TV/VCR Combinations:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
0184, 0121, 0209, 0002,
0295, 0479
0072, 0278
0037
CCE
Calix
0037, 0278
0072
1
2
3
Turn on your VCR and insert a tape.
KLH
Canon
Capehart
Carver
Cineral
Citizen
Colt
0035
0020
0081
0278
Kenwood
Kodak
LXI
Lloyd’s
Logik
0067, 0041, 0038, 0046
0035, 0037
0037
0000, 0208
0072
Press and release the VCR key.
0037, 0278
0072
0037, 0047, 0240, 0072,
0271
Press and hold SETUP until the
display screen changes from
[VCR and the TIME] to [TIMED SEQ].
MEI
MGA
0035
0240, 0043, 0061
Craig
MGN Technology 0240
MTC
Curtis Mathes 0060, 0035, 0041, 0162
0240, 0000
Cybernex
Daewoo
Daytron
Denon
Dynatech
Electrohome
Electrophonic 0037
Emerex
Emerson
0240
Magnasonic
Magnavox
0278, 0593
0035, 0039, 0081, 0000,
0149, 0110
0240
0035, 0081, 0038
0037
0035, 0162, 0454
0035, 0037, 0048, 0039,
0047, 0240, 0000, 0104,
0046, 0307, 1037, 1162,
1262
0042, 0105
0048, 0067, 0043, 0061
0035, 0048
4
5
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
0045, 0278, 0020, 0561
0020
0042
0000
0037
Magnin
Marantz
Marta
Matsushita
Memorex
0032
0037, 0184, 0000, 0121,
0043, 0209, 0002, 0278,
0036, 0061, 0068, 0208,
0212, 0295, 0479, 0561
0047, 0104, 0054, 0066
0035, 0033
Press SELECT and the display
screen will change to [VCR].
Minolta
Mitsubishi
Motorola
Multitech
NAP
Fisher
Fuji
Funai
GE
0000
0000, 0072
0035, 0037, 0039, 0042,
0033, 0034, 0066, 0105
0060, 0035, 0048, 0240,
0202
14
15
Set Up Codes For VCRs (Cont.)
To Set Up Your Cable Box:
Sansui
0000, 0067, 0041, 0271,
0479
0047, 0240, 0104, 0046
0184, 0045, 0121, 0043,
0210, 0212
0035, 0037, 0047, 0000,
0042, 0104, 0046, 0054,
0066, 0105
0045
0048, 0062
0072
0240
NEC
0104, 0067, 0041, 0038,
0040
0037
0034, 0253
0240
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
Sanyo
Scott
Nikko
Nikon
Noblex
Olympus
Optimus
1
2
3
Turn on your Cable Box.
Sears
0035
Press and release the CBL/SAT key.
0037, 0048, 0104, 0162,
0432, 0454, 0593, 1048,
1062, 1162, 1262
0062
0184, 0002, 0295, 0479
0035, 0162, 0077, 0225,
0454, 1162
0035, 0037, 0240, 0042,
0038, 0040, 0054
0042, 0105
0035, 0209, 0479
0035, 0081, 0062, 0110
0037
0067
0020
0240
0060, 0202
0072
0039
0046
0046
0035, 0162, 0077, 0454,
1162
0060, 0035, 0048, 0240,
0042, 0149, 0077, 0105,
0106, 0202
0000, 1037
0037
0037
0035, 0037, 0048, 0047,
0000, 0104, 0062, 0046,
0066
0034, 0253
0039
0042
0240, 0045
0048, 0039
Semp
Sharp
Shintom
Shogun
Signature
Singer
Press and hold SETUP until the
display screen changes from
[CABLE and the TIME] to
[TIMED SEQ].
Optonica
Orion
Panasonic
0035
0072
Penney
Sony
0035, 0032, 0000, 0033,
0034, 0253
0253
0035, 0081, 0000, 0043,
0110
0000, 0593
0240, 0036, 0208
0041
0000, 0041
0060, 0035, 0039, 0162,
0202
0035, 0037, 0000
0000
Pentax
Philco
Philips
Pilot
Pioneer
Portland
Profitronic
Proscan
Protec
Pulsar
Quarter
Quartz
Quasar
Sunpak
Sylvania
4
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
Symphonic
TMK
Tatung
Teac
Technics
5
6
Press SELECT and the display
screen will change to [CABLE].
Teknika
Thomas
Toshiba
0045, 0043, 0066, 0210,
0212
0037, 0240
0240
0045
Enter the first Cable Box code listed
for your brand in the “Set Up Codes
for Cable Boxes” on page 16, the
press SELECT.
Totevision
Unitech
Vector
Vector Research 0038, 0040
Video Concepts 0045, 0040, 0061
RCA
Radio Shack
Radix
Randex
Videosonic
Wards
0240
0060, 0035, 0048, 0047,
0081, 0240, 0045, 0000,
0042, 0072, 0149, 0062,
0212
Realistic
7
Point the remote control at the Cable
Box and press POWER.Your Cable
Box should turn OFF. If your Cable
Ricoh
Runco
STS
Samsung
Sanky
W. Westinghouse 0278
XR-1000
Yamaha
Zenith
0035, 0000, 0072
0041, 0038
0039, 0000, 0033, 0034,
0479
Box turns OFF, press the ESC key
to return the display to [CABLE and
the TIME]. If your Cable Box does
not turn OFF, enter the next code in
the code list then press SELECT fol-
lowed by POWER again. Once the
correct code is entered, press the
ESC key to return the display to
[CABLE and the TIME].
Set Up Codes for TV/VCR Combinations:
Panasonic
Penney’s
Quasar
0035 (TV = 0051),
0162 (TV = 0250)
0035 (TV = 0051), 0240,
0162 (TV = 0250)
0035 (TV = 0051), 0162
(TV = 0250)
0035 (TV = 0051), 0060
(TV = 0047),
0048 (TV = 0093)
0000, 0479
0240
0000, 0037
0032 (TV = 0000)
0000
0000
American High 0035 (TV = 0051)
Brocksonic
Colt
0002, 0294, 0479
0072
Curtis Mathes 0035 (TV = 0051)
Daewoo
Emerson
Funai
0278 (TV = 0451)
0002, 0294, 0479
0000
0035 (TV = 0051),
0060 (TV = 0047),
0048 (TV = 0093), 0240
0035 (TV = 0051), 0000
0000
RCA
NOTE: If your original Scientific Atlanta remote control does not
have an “ON” key, press CH+ or one of the digit keys on the a/v
Producer to turn your Cable Box on.
GE
Sansui
Sanyo
Sears
Sony
Symphonic
Zenith
Hitachi
HQ
Lloyds
Magnavox
For a detailed explanation of what function each
key will perform in the Cable mode, please refer to
page 53 in the “Key Index”.
0000
0000, 0035 (TV = 0051),
0081 (TV = 0054)
0240
0037, 0162 (TV = 0250)
0240
Magnin
Memorex
MGA
Mitsubishi
Orion
NOTE: If a separate TV code is listed
for your brand, use it to set up your
television by following the instructions
on page 10.
0048 (TV = 0093)
0002, 0294, 0479
16
17
4
Press the MENU – key. The display
Set Up Codes For Cable Boxes
screen will change to [CODE SET
UP]. Press SELECT. The display
will change to [DEV SET UP].
ABC
0003, 0008, 0014, 0017,
0007, 0011, 0001, 0013
0153, 0315
0022, 0207
0153, 0022, 0207, 0797
0056
Philips
0153, 0025, 0027, 0031
0144, 0023, 0533
Pioneer
Popular
Mechanics
Proscan
Pulsar
Allegro
Antronix
Archer
Belcor
0400
0021
0000
0000
5
6
7
Press SELECT and the display
screen will change to [CABLE].
Bell & Howell 0014
Quasar
Cable Star
Cabletenna
Cableview
Century
0056
0022
0022
0153
0153, 0315
0025, 0031
0040
RCA
0021
Radio Shack
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
0015, 0315, 0797, 0883
0207
0400
0020, 0259
0002
0011
0000
0040
0144, 0040
Press the MENU – key. The display
screen will change to [SAT].
Citizen
Colour Voice
Comtronics
Contec
Enter the first Satellite code listed
for your brand in the “Set Up Codes
for Satellites” on page 17, then
0019
Digi
Eastern
Emerson
Everquest
Focus
0637
0002
0797
0015, 0040
0400
SL Marx
Samsung
Scientific
Atlanta
Seam
press SELECT. Point the remote
control at the Satellite and press
POWER. Your Satellite should turn
OFF. If your Satellite turns OFF,
press the ESC key to return the dis-
play to [SAT and the TIME]. If your
Satellite does not turn OFF, enter
the next code in the code list then
press SELECT followed by POWER
again. Once the correct code is en-
tered, press the ESC key to return
the display to [SAT and the TIME].
0008, 0477, 0017
0510
0015, 0040
0011
GC Electronics 0056, 0207
Signal
Garrard
Gemini
0153
0015
Signature
Sprucer
Starcom
Stargate
Starquest
Sylvania
TFC
0021
General
Instrument
GoldStar
Goodmind
Hamlin
Hitachi
0003, 0015
0015, 0040, 0797
0015
0001
0310
0063
0258
0040
0001
0418
0012, 0013
0000
0015
0153, 0022, 0207
0476, 0276, 0011, 0810
0144, 0040
0797
0020, 0259, 0009, 0034
0011
TV86
Hytex
0007
Tandy
Jasco
Jerrold
0015, 0153, 0315
0003, 0012, 0476, 0276,
0014, 0015, 0011, 0810
0440
Teleview
Texscan
Timeless
Tocom
Linsay
Magnavox
Memorex
Movie Time
NAP
0014, 0027
0000
0063, 0156
0007
Toshiba
Tusa
Unika
For a detailed explanation of what function each key
will perform in the Satellite mode, please refer to
page 56 in the “Key Index”.
United Artists 0007
NSC
Novaplex
Oak
Optimus
Panasonic
Panther
Paragon
0063, 0156
0618
0019, 0007
0021
0000, 0107, 0021
0637
0000
Universal
0153, 0022, 0056, 0191,
0207
0250
0063, 0027, 0258
0008, 0000, 0015, 0207,
0525
Videoway
Viewstar
Zenith
Set Up Codes for DSS and Satellite Receivers
Zentek
0400
AlphaStar
Astro Industries 0095
0772
Jerrold
Legend
0627, 0361
0269
BSR
Capetronic
Channel Master 0018, 0212
Chaparral
DX Antenn
Drake
0095
0095
Macom
0018
Magnavox
Memorex
Next Level
Panasonic
Philips
President
Primestar
Proscan
RCA
0724, 0722
0724, 0269
0869
0701, 0152
0724, 0722, 0200
0074
0627, 0361
0566
0566, 0143, 0392, 0855
0566, 0869
0052
0053, 0209, 0216
0041
0018, 0064, 0149, 0245
0775, 0148, 0159, 0269,
0280
0775
To Set Up Your DSS or Satellite Receiver:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
Echosta
Expressvu
General
Instrument
HTS
Hitachi
Homecable
Hughes
Network Sys. 0749
Hytek
IQ
IQ Prism
JVC
Janeil
1
Turn on your DSS or Satellite
Receiver.
0627, 0361, 0869
Radio Shack
Realistic
STS
0775
0819
0238
0041, 0210
0639
0869
2
3
Press and release the CBL/SAT key.
Sony
Star Choice
Star Trak
Toshiba
Uniden
0180
Press and hold SETUP until the
display screen changes from
[CABLE and the TIME] to [TIMED
SEQ].
0095
0210
0210
0775
0152
0790, 0082
0724, 0722, 0052, 0074,
0076, 0238, 0370
0064, 0245, 0856
Zenith
18
19
To Set Up Your DVD or LD Player:
Set Up Codes for DVD Players
Harman/Kardon 0582
Pioneer
Proscan
RCA
Samsung
Sony
Technics
Theta Digital
Toshiba
Yamaha
Zenith
0525, 0571
0522
0522
0573
0533
0490
0571
0503
0490, 0545
0503, 0591
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
JVC
Kenwood
Magnavox
0558
0534
0503
1
Turn on your DVD or LD Player and
insert a disc.
Magnavox CD-R 0626
Mitsubishi
Onkyo
0521
503
Optimus
Panasonic
Philips
0525
0490
0503, 0539
2
3
Press and release the DVD key.
Press and hold SETUP until the
display screen changes from
Set Up Codes for LD Players
[DVD and the TIME] to [TIMED SEQ].
Aiwa
Carver
Denon
Disco Vision
Funai
0203
Panasonic
Philips
Pioneer
Quasar
Realistic
Samsung
Sega
0204
0064, 0194, 0323
0059, 0172
0023
0064, 0194
0059, 0023
0204
0203
0323
4
5
Press the MENU – key one time.
The display screen will change to
[CODE SET UP]. Press SELECT.
The display will change to
[DEV SET UP].
0203
Harman/Kardon 0194
Hitachi
0023
0023
Magnavox
Marantz
Mitsubishi
NAD
0194, 0217
0064, 0194
0059
Sony
0193, 0201
0204
0194
Technics
Theta Digital
Yamaha
Press SELECT and the display
0059
0217
screen will change to [DVD].
NOTE: If you are setting up a LD Player, press either MENU + or
MENU –. The display will change to [LDP].
To Set Up Your CD or MD Player:
6
Enter the first DVD or LD code listed
for your brand in the “Set Up Codes
for DVD Players” or “Set Up Codes for
LD Players” on the next page, then
press SELECT. Aim the remote con-
trol at the DVD or LD player and
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1
Turn on your CD or MD Player and
insert a disc.
2
3
Press and release the CD key.
or press POWER or PLAY.Your player
should turn OFF or start to play your
disc. Press the ESC key to return the
display to [DVD and the TIME]. If
your player does not turn OFF or start
to play your disc, enter the next code
in the code list then press SELECT
followed by POWER or PLAY again.
Once the correct code is entered,
press the ESC key to return the dis-
play to [DVD and the TIME].
Press and hold SETUP until the
display screen changes from
[CD and the TIME] to [TIMED SEQ].
4
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
5
6
Press SELECT and the display
screen will change to [CD].
For a detailed explanation of what function each key
will perform in the DVD mode, please refer to
page 55 in the “Key Index”.
Enter the first CD code listed for your
brand in the “Set Up Codes for CD or
MD Players” on the next page, then
press SELECT.
20
21
To Set Up Your CD or MD Player (cont.):
Set Up Codes for CD or MD Players (cont.)
Sylvania
Tascam
Teac
Technics
Vector
0157
0420
Victor
Wards
Yamaha
Yorx
0072
7
Aim the remote control at the CD or
MD player and press POWER or
PLAY.Your player should turn OFF
or start to play your disc. Press the
ESC key to return the display to [CD
and the TIME]. If your player does not
turn OFF or start to play your disc,
enter the next code in the code list
then press SELECT followed by
POWER or PLAY again. Once the
correct code is entered, press the
ESC key to return the display to [CD
and the TIME].
0157, 0053
0036, 0170, 0187
0461
0420, 0393, 0174, 0180
0029, 0207, 0303
or
Research
0194, 0417
To Set Up Your Tuner/Receiver:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1
2
3
Turn on your Tuner/Receiver.
Press and release the TUNER key.
Press and hold SETUP until the
display screen changes from [TUNER
and the TIME] to [TIMED SEQ].
For a detailed explanation of what function each
key will perform in the CD mode, please refer to
page 60 in the “Key Index”.
4
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
Set Up Codes for CD or MD Players
ADC
0018
Magnavox
0157, 0305
Adcom
Aiwa
Akai
Audio Alchemy 0194
Audio-Technica 0170
0155, 0234
0157, 0012, 0124
0156
Magnavox CD-R 0626
Marantz
McIntosh
Mission
NEC
0029, 0157, 0180
0287
0157
0043, 0234
5
6
Press SELECT and the display
screen will change to [TUNER].
BSR
0194, 0245
NSM
Nakamichi
Nikko
Onkyo
Optimus
0157
0147
0164, 0170, 0174
0101, 0868
000, 0032, 0179, 0305,
0037, 0420, 0145, 0468,
0087, 0175, 0194, 0196,
0280, 0342, 0426, 0437
0029, 0303, 0367, 0752
0420, 0194
0157, 0287, 0626
0032, 0305, 0468, 0244
0053
Bang & Olufsen 0212
Burmester
California
Audio Labs
Carrera
Carver
Crown
Curtis Mathes 0029
DAK
DBX
DKK
0420
Enter the first Tuner code listed for
your brand in the “Set Up Codes for
Tuner/Receivers” on the next page,
then press SELECT. Aim the remote
control at the Tuner/Receiver and
press POWER.Your Tuner/Receiver
should turn OFF. Press the ESC key
to return the display to [TUNER and
the TIME]. If your Tuner/Receiver
does not turn OFF, enter the next
code in the code list then press
SELECT followed by POWER. Once
the correct code is entered, press the
ESC key to return the display to
[TUNER and the TIME].
0029
0194
0157, 0179, 0437
0122
Panasonic
Parasound
Philips
Pioneer
Proscan
Proton
QED
0245
0254
0000
0003, 0873
0305, 0155, 0164, 0469
0179, 0088, 0174, 0342
0009
0420, 0393, 0245, 0280,
0425
Denon
Emerson
Fisher
GE
0157
0157
0029
Quasar
RCA
Garrard
0179, 0305, 0053, 0009,
0155, 0764
0179, 0420, 0155, 0164,
0175, 0180
0157, 0420
0157
0018
0157, 0305, 0202
0179, 0087
0305, 0155, 0164
0305
0037, 0180, 0861
0180, 0196, 0426
0043
Genexxa
GoldStar
0032, 0305, 0164
0417
Realistic
Harman/Kardon 0157, 0173, 0426
Hitachi
JVC
Rotel
SAE
STS
0032, 0155
0072, 0655, 0658
0028, 0037, 0190, 0826,
0681
0287
0157
0018
0305
0157
0093
0029, 0043
0420
Kenwood
Sansui
Sanyo
Scott
Sears
Sharp
Sherwood
Shure
Sony
Kodak
Krell
Kyocera
LXI
Linn
Luxman
MCS
For a detailed explanation of what function each
key will perform in the Tuner mode, please refer to
page 57 in the “Key Index”.
0000, 0185, 0490, 0604,
0605
0145, 0425
MTC
Soundesign
22
23
Set Up Codes For Tuner/Receivers
To Set Up Your Amplifier (cont.):
ADC
0531
0616
Optimus
0531, 0670, 0186, 0042,
0177, 0181, 0219, 0738,
0801, 1023, 0042,
0080*, 0181, 0186,
0531, 0670, 0738, 0801
0039, 0309, 0518
0195
5
Press SELECT and the display
screen will change to [AMP].
Adcom
Aiwa
Akai
Bang & Olufsen 0898
Capetronic
Carver
Casio
Clarinette
Curtis Mathes 0039, 0080
Denon
Emerson
Fisher
Garrard
Harman/Kardon 0110, 0189, 0891
Inkel
JBL
JVC
Kenwood
0158, 0189, 0121, 0405
0076, 0224
6
Enter the first Amplifier code listed for
your brand in the “Set Up Codes for
Amplifiers” on the next page, then
press SELECT.
0531, 0195
0189, 0008, 0042, 0360
0195
0195
Panasonic
Penney
Philips
0189, 0391
Pioneer
0531, 0014, 0150, 0630,
0080, 1023, 0014*,
0080*, 0150, 0531,
0630, 1023
0054
0039
0531, 0054, 0346, 0360,
0530
0195, 0163, 0181
0189, 0193, 0346
0219, 0801
0004, 0273, 0771
0424
0042, 0219, 0360, 0801
0463, 0424
7
Aim the remote control at the
Proscan
Quasar
RCA
Amplifier and press POWER.Your
Amplifier should turn OFF. Press the
ESC key to return the display to [AMP
and the TIME]. If your Amplifier does
not turn OFF, enter the next code in
the code list then press SELECT
followed by POWER. Once the cor-
rect code is entered, press the ESC
key to return the display to [AMP and
the TIME].
0062
0110
0074
Realistic
Sansui
Sanyo
Scott
Sharp
Sherwood
Siemens
Sony
0027, 0186, 0042, 0077,
0313, 0314
0424
0181
0189
0163, 0322
0186
Koss
LXI
Linn
Lloyd’s
MCS
0491, 0062, 0502
0424
0158, 0168, 0474,
0158**, 0474
0670
0463, 0163
0039, 0309, 0208, 0518
0074
0195
0039, 0346
0531, 0189, 0195, 0128,
0391
0039, 0189, 0128
0195
0320
0235
0097, 0347
0135, 0100, 0380
Magnavox
Soundesign
Teac
Technics
Victor
Marantz
Modulaire
NAD
NEC
Nakamichi
Onkyo
For a detailed explanation of what function each key
will perform in the Amplifier mode, please refer to
page 58 in the “Key Index”.
Wards
0158, 0014, 0189, 0080,
0042, 0054
0176, 0186
Yamaha
Yorx
0195
Zenith
0857
Set Up Codes for Amplifiers
NOTES: *May use Amplifier code 0013 for power and volume.
See below section for amplifier setup and codes.
Aiwa
Bose
Carver
Curtis Mathes 0300
Denon
GE
0406
0674
0269
Optimus
Panasonic
Parasound
Philips
Pioneer
Realistic
Sansui
0395
0308
0246
0269, 0892
0013, 0300
0395
**May use Miscellaneous Audio code 0159 to operate surround
and tuner presets. See page 24 for misc. audio setup and codes.
0160
0078
Harman/Kardon 0892
0321
JVC
Kenwood
Linn
Luxman
Magnavox
Marantz
NEC
0331
0356
0269
0165
0269
0269, 0321, 0892
0264
Shure
Sony
Soundesign
Technics
Victor
0264
To Set Up Your Amplifier:
0220, 0689
0078, 0211
0308, 0521
0331
0013, 0078, 0211
0354, 0133, 0143, 0504
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
Wards
Yamaha
1
2
3
Turn on your Amplifier.
Nakamichi
0321
Press and release the AMP key.
Press and hold SETUP until the
display screen changes from
[AMP and the TIME] to [TIMED SEQ].
4
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
24
25
6
7
Press MENU – to toggle between
[TAPE] and [DAT]. Once [TAPE] is
SETTING UP ADDITIONAL HOME
ENTERTAINMENT COMPONENTS
on the display screen, enter the first
Cassette Deck code listed for your
brand in the “Set Up Codes for
Cassette Decks” on the next page,
then press SELECT.
Besides the device keys that are already labeled
(TV, VCR, CBL, etc.), the a/v Producer can also
operate the following components: Cassette Decks,
Home Automation, Digital Audio Tape, Turntables,
Video Accessories, and Miscellaneous Audio
Components (e.g., Graphic Equalizers and Digital
Music Service Boxes).
Point the remote control at the
Cassette Deck and press POWER.
Your Cassette Deck should turn
OFF. Then press the ESC key to
return the display to [TAPE and the
TIME]. If your Cassette Deck does
not turn OFF, enter the next code in
the code list then press SELECT
followed by POWER again. Once
the correct code is entered, press
the ESC key to return the display to
[TAPE and the TIME].
The Set Up codes for these devices can be
accessed under the following device keys:
Cassette Decks:
Home Automation:
Digital Audio Tape:
Turntables:
Use the AUX1 Key
Use the CD Key
Use the AUX1 Key
Use the CD Key
Video Accessories:
Use the CBL/SAT Key
(Note: Web TV found under Video Accessories)
Miscellaneous Audio: Use the AMP Key
Re-assigning Device Keys
NOTE: Each device key (e.g., TV, VCR, CBL/SAT, etc.) can
only operate one component at a time. If you have already set
up a component on a key, then assigning a second component
on the same key will erase the code for the first component you
set up. For example, if you set up a DVD Player on DVD and
then set up a Turntable on DVD, the a/v Producer will only oper-
ate the Turntable.
You can use the a/v Producer to operate a second
TV or a second VCR or any combination of eight
devices. To do this, you must re-assign one of the
device keys (i.e., TV, VCR, DVD, CBL/SAT,
TUNER, AMP, CD, or AUX1) to operate your sec-
ond device. For example, to re-assign one of the
device keys to support your other components:
For example, to set up a Cassette Deck on the
AUX1 key:
NOTE: If the four-digit code for your device begins with a “0”,
only the last three numbers of your code will be displayed.
1
Press and hold SETUP until the
display screen changes from
[DVD/LDP and the TIME] to
[TIMED SEQ].
1
2
3
Turn on your Cassette Deck.
Press and release the AUX1 key.
2
x2 Press the MENU – key twice.
The display screen will change to
[CONFIGURE]. Press SELECT.
The display will change to
[THEATR SEL].
Press and hold SETUP until the
display screen changes from
[TAPE and the TIME] to [TIME SEQ].
4
5
Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
3
x3 Press the MENU – key three times.
The display screen will change to
[MODE MAP]. Press SELECT.
The display will change to
[SOURCE].
Press SELECT and the display
screen will change to [TAPE].
|