Omnitron Systems Technology Network Card 8249 0 User Manual

3. The iConverter with the tab brackets should look

like the picture below (Fig. 1).

4. Attach unit to the desired surface using the

appropriate screws.

5. Follow any installation instructions in the iConverter

User Manual.

iConverter^®Wall-Mounting Kit

User Instructions

Description and Inventory

The 8249-0 iConverter Wall-Mounting kit was

designed to attach one iConverter 1-Module or 2-

Module chassis to a wall, backboard or other flat

surface. The 8249-0 kit should include the following

hardware:

Wall Mounting Bracket

Fig. 1 1-Module Chassis with

Wall Mounting Kit

(2)

(4)

“L” shaped brackets

Flat head screws, 4-40, 1/4 inch

Wall mounting screws

Technical Support:

For help with this product,

contact our Tech. Support:

Phone: (949) 250-6510

Warning:

Before installing an iConverter chassis, make sure to

remove it from its power adapter. Make sure to

disconnect the power adapter from the AC line power.

Fax:

(949) 250-6514

Mounting:

1. Align the screw threads of the iConverter chassis

with the holes in the bracket.

Address: Omnitron Systems

2. Attach one “L” bracket on each side of the unit

using the 4-40 flat head screws enclosed with the kit.

040-08249-001C 12/03